Slayer Espresso 3 Group
OVERVIEW
The ultimate Slayer experience, unparalleled in performance and consistency. Independent brew groups, massive steam capacity, and an exclusive pre-heat tank – all digitally controlled – combine to create the most powerful espresso machine on the market. Temperatures are configured and maintained with dedicated gadgetry, offering versatility in extraction and stability in steam production. Slayer delivers on the promise of unlimited steam.
Experience a new paradigm for espresso preparation as well, with the flavor profiling capabilities of Slayer Espresso. Each of 3 groupheads can be calibrated to distinct temperatures and flow rates in order to optimize extraction for all coffees. Patented technology introduces a pre-brew wetting stage and unique brewing profiles, advancing all possibilities for amazing espresso.
Ideal for: high-volume cafes and coffee shops
FEATURES
- Manual espresso extraction
- Pre-brew wetting stage
- Flavor profiling with 3-position actuator
- Patented flow rate control
- Electronic group valves
- Independent brew tanks
- Unlimited steam
- Pre-heat tank
- Digital temperature control
- European Ash wood handles and actuators
- Blended hot water valve
- Modular pre-brew timers
- Versatile power supply
- Shot mirror
- Made in Seattle, USA
- Certified ETL Sanitation* (conforms to NSF/ANSI Standard 4)
OVERVIEW
The ultimate Slayer experience, unparalleled in performance and consistency. Independent brew groups, massive steam capacity, and an exclusive pre-heat tank – all digitally controlled – combine to create the most powerful espresso machine on the market. Temperatures are configured and maintained with dedicated gadgetry, offering versatility in extraction and stability in steam production. Slayer delivers on the promise of unlimited steam.
Experience a new paradigm for espresso preparation as well, with the flavor profiling capabilities of Slayer Espresso. Each of 3 groupheads can be calibrated to distinct temperatures and flow rates in order to optimize extraction for all coffees. Patented technology introduces a pre-brew wetting stage and unique brewing profiles, advancing all possibilities for amazing espresso.
Ideal for: high-volume cafes and coffee shops
FEATURES
- Manual espresso extraction
- Pre-brew wetting stage
- Flavor profiling with 3-position actuator
- Patented flow rate control
- Electronic group valves
- Independent brew tanks
- Unlimited steam
- Pre-heat tank
- Digital temperature control
- European Ash wood handles and actuators
- Blended hot water valve
- Modular pre-brew timers
- Versatile power supply
- Shot mirror
- Made in Seattle, USA
- Certified ETL Sanitation* (conforms to NSF/ANSI Standard 4)
SPECIFICIATIONS
INCLUDED
- Version 3 groupheads rated to 1 million cycles before maintenance
- Bottomless (“naked”) chrome-plated, brass portafilters
- 58-millimeter portafilter baskets
- Teflon-coated screens shower evenly & clean easily
- Brew temperature PID controllers ensure accuracy within 0.5º F
- Steam and pre-heat Love controller allows quick adjustment
- 1.3-millimeter, 4-hole steam wand tips
- Saturated groups with auto-bleed
- External rotary pump
- Direct plumb only
- Certified ETL Sanitation* (conforms to NSF/ANSI Standard 4)
Tank Capacities:
- Steam tank: 12.0 liters
- Brew tanks: 1.2 liters per group (3)
- Pre-heat tank: 5.4 liters
- 200-260 volts AC, 50/60 hertz
- Single-phase (three-phase optional)
- 8,000 watts
- 35 amps
- NEMA 6-50 receptacle (included)
COUNTERTOP
- Minimum load capacity: 140.0 kilograms / 305.0 pounds
- Two (2) holes for power/water/ drain: 5.0 centimeters / 2.5 inches diameter
PLUMBING
- Water line: dedicated 3/8-inch British Standard Pipe (BSP), cold with shut-off valve*
- Incoming water pressure: 3-5 Bar / 43-72 PSI
- Incoming flow rate: 1.5 gallons per minute
- Drain: open gravity drain located within 4.0 feet / 1.2 meters
WATER TREATMENT
- Hardness: not to exceed 50 parts-per-million
- Total dissolved solids: 75-125 parts-per-million
*In North America, use 3/8 inch compression to 3/8 inch National Pipe Thread (NPT) male fitting and cross-thread into 3/8 inch BSP water line.
- Weight & DimensionsLength: 101.6 centimeters / 40.0 inches
- Width: 55.9 centimeters / 22.0 inches*
- Height: 43.2 centimeters / 17.0 inches
- Weight: 122.5 kilograms / 270.0 pounds
*Add 6.4 centimeters / 2.5 inches for portafilter hangover at front.
Purchase from shop only
Check the final price from us
