OVERVIEW

The serious barista’s dream machine. In a compact footprint, Slayer Single Group packs the same commercial head, steam valves, and brew actuator as its predecessors – plus a few extras. With a new touchscreen interface that assists in flavor profiling and temperature management, you’re looking at a one-group espresso machine with unprecedented capability.

Enjoy the best that your espresso has to offer with Slayer’s signature flow control. In both manual and semi-automatic modes, the Single Group divides extraction into multiple stages and manipulates flow rate to highlight the inherent sweetness of espresso. Extreme grind fineness, made possible by patented pre-brew technology, lends to extraordinary body and beautiful crema. Around the world, professional and amateur baristas alike are making exceptional coffee with the Slayer Single Group.

Ideal for: Espresso bars, small restaurants, catering events and your kitchen.

FEATURES

• European Ash wood handles and actuators
• Glass touchscreen display
• Automatic shot timers
• Adjustable brew temperature
• Shot mirror
• Hot water tap
• Non-slip feet
• Variable flow rate
• Personalized steam pressure with PID & customizable wand tip
• Dual tanks with power management
• Pre-heat coil for brew temperature stability
• Commercial portafilter with 58mm, 18g basket
• Direct plumb
• Certified ETL Sanitation* (conforms to NSF/ANSI Standard 4)
• Technical HighlightsCommercial version 3 grouphead rated to 1 million cycles before maintenance
• Bottomless (“naked”) chrome-plated, brass portafilters
• 58-millimeter portafilter baskets
• Teflon-coated screens shower evenly & clean easily
• Universal stainless steel group bayonet
• PID temperature & pressure control, adjustable in 0.1º increments (Celsius or Fahrenheit)
• 1.1-millimeter, 4-hole steam wand tip
• Steam pressure transducer
• Saturated group with auto-bleed
• Internal gear pump
• Direct plumb only
• Certified ETL Sanitation* (conforms to NSF/ANSI Standard 4’)

• Tank CapacitiesBrew tank: 1.1 liters
• Steam tank: 3.3 liters
• Pre-heat coil: 60.0 milliliters

Installation Requirements

COUNTERTOP

• Minimum load capacity: 70.0 kilograms / 150.0 pounds
• Hole for power/water/ drain: 5.0 centimeters / 2.5 inches diameter

PLUMBING

• Water line: dedicated 3/8-inch British Standard Pipe (BSP), cold with shut-off valve*
• Incoming water pressure: 3-5 Bar / 43-72 PSI
• Incoming flow rate: 1.5 gallons per minute
• Drain: open gravity drain located within 4.0 feet / 1.2 meters
• Included accessories: 5/8-inch / 15.88-millimeter drain hose with hose clamp AND 60-inch x 3/8-inch / 152.4-centimeter x 9.53-millimeter braided steel hose

WATER TREATMENT

• Hardness: not to exceed 50 parts-per-million
• Total dissolved solids: 75-125 parts-per-million

*In North America, use 3/8 inch compression to 3/8 inch National Pipe Thread (NPT) male fitting and cross-thread into 3/8 inch BSP water line.

• Power & Electric110 volts / 15 amps OR 220 volts / 10 amps
• 600-watt brew tank heating element
• 1,300-watt steam tank element for 110-volt option; 2,000-watt for 220-volt option

Weight & Dimensions

LENGTH

• Body: 18.1 inches / 46.0 centimeters
• Foot to foot: 17.7 inches / 45.0 centimeters

WIDTH

• Body: 24.3 inches / 61.7 centimeters
• Foot to foot: 17.5 inches / 44.4 centimeters
• Rear panel (top) to disengaged steam actuator (top): 11.2 inches / 28.5 centimeters

HEIGHT

• Top of rear panel: 12.8 inches / 323.8 millimeters
• Top of brew actuator: 13.4 inches / 340.3 millimeters
• Top of engaged steam actuator: 14.5 inches / 368.3 millimeters
• Group height, drip tray to portafilter: 4.7 inches / 119.4 millimeters

WEIGHT

• Dry: 100.0 pounds / 45.5 kilograms
• Wet: 110.0 pounds / 49.9 kilograms
• Shipping: 160.0 pounds / 72.60 kilograms

Purchase from shop only

Check the final price from us